9300 High-Voltage Battery Test System

Model : NHR 9300 High-Voltage Battery Test System

Q'ty :

High-Voltage Battery Test System – 9300 Series

Battery Test System for Automated Charge/Discharge Cycling of Batteries
plus Other Energy Storage Components & More!

Features

Wide Operating Envelope at 100kW per cabinet
Scalable to 1.2MW/4000A
Regenerative, greater than 90% efficiency of discharge power returned to AC mains
Built-in digital measurements with charting & scope displays
Current, Voltage & Mode transitions in <2 mSec
Battery Emulation Mode
Touch Panel, LabVIEW^® & IVI Drivers
Enerchron^® Test Executive

9300 Series High-Voltage Battery Test System Specifications

Model #	9300-100	9300-200	9300-300	9300-400	9300-500	9300-600
Rating	100kW	200kW	300kW	400kW	500kW	600kW
Max Current @ 600V	333A	666A	999A	1332A	1665A	1998A
Current @ 1200V	±167A	±334A	±501A	±668A	±835A	±1002A
	9300-700	9300-800	9300-900	9300-1000	9300-1100	9300-1200
Rating	700kW	800kW	900kW	1000kW	1100kW	1200kW
Max Current @ 600V	2331A	2664A	2997A	3330A	3663A	3996A
Current @ 1200V	±1169A	±1336A	±1503A	±1670A	±1837A	±2001A
Programming Capability
Operating States	Charge (Source), Discharge (Load), Standby, Battery Emulation
Charge/Discharge Modes	Constant-Voltage (CV), Current (CC), Power (CP), Series Resistance (CR)
Charging Envelope	0 – 600V/±333A, 0 -1200V/±167A
Discharging Envelope	30 – 600V/±333A, 60 – 1200V/±167A
Voltage Accuracy	0.1% Set + 0.1% Range
Current Accuracy	0.2% Set + 0.2% Range
Slew Rate	Same polarity 10 – 90% < 2mS Low Range, < 3mS High Range
Current Change Time	< 5mS
Current Reverse Time	< 10mS
Parallelability	Synchronous control for up to 12 channels ( 1.2MW)
Macro Test Profiles
Development Source	Touch-Panel, Import from Excel or User’s System Controller
Max. Steps	1000
Min.Time Delay	50µS
Max. Step Delay	1mS – 7 days
Physical
Size (HxWxD)	78 x 28 x 39″/1981 x 711 x 991mm
Weight	1200lbs/544kg
* The above specifications show typical configurations & subject to change. Contact NH Research, Inc. for further information.

Advantages

Designed for testing & emulating all battery chemistries
– Automatic energy integration (full & 1/2 cycle)
– Multiple safety layers to protect UUT
Battery emulation In Hardware (OCV & series resistance) Software tools to shorten test development time
– PC-based Softpanel GUI with charting
– Supplied LabVIEW & IVI-C/IVI-COM drivers
– Optional: Enerchron^® test sequencer

Benefits

Regenerative, returns greater than 90% of power to the facility, which provides significant electrical savings.
Dual Range: 1200V/167A & 600V/333A @ 100kW
Modular design allows field expansion up to 1.2MW / 4000A
Safely simulate and emulate “Real World” conditions
– Fast voltage, current, & mode transition times
– Safely emulate over/under charged batteries
– Safely emulate BMS & battery failures

Applications

The High-Voltage Battery Test System (9300 Series) is a fast-acting, fully programmable, and bi-directional DC source (charge) that provides reversible current flow in order to act as a regenerative DC load (discharge). Both modes support any combination of constant power, constant voltage, and constant-current regulation limits. Products tested include batteries, fuel cells, ultra-capacitors, and other energy storage devices used in the automotive, aviation, heavy industrial, marine, grid storage, university research, and standards certification laboratory markets. The most frequent uses are for battery charge/discharge cycling, testing battery chargers and battery emulation.

9300 High-Voltage Battery Test System

Related Products

9210 Single Channel Battery Test System

Battery Pack Test System NHR 9200

9200 Battery Pack Test System

9220 Charge/Discharge Test System